Autor Subiect: Sbox Digi  (Citit de 1243 ori)

0 Membri şi 1 Vizitator vizualizează acest subiect.

Offline catalin

  • Administrator
  • Teacher
  • *****
  • Mesaje postate: 116
  • Karma: +0/-0
  • Gen: Bărbat
    • Filmul Nuntii Tale!
Sbox Digi
« : Noiembrie 18, 2015, 06:31:59 p.m. »
Configurare.

[main]
server_only=1            # 0=mixed mode 1=only server
log=0               # 0=no log 1=log to /tmp/sbox.log   //ALWAYS USE 0//
logudp=192.26.0.1:3354         # server ip:server port
userspath=/var/bin/users.sbox      # users list
channelinfo=/var/bin/sbox.channelinfo   # channel info
webinterface=1            # 1=web interface on 0=web interface off
webadmin=root:admin         # user:pass for webinterface
webport=81            # web interface port
rdgserver=0            # 0=radegast server off 1=radegast server on
rdgport=16050            # radegast server port
use_nagra=1            # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=                               # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000            # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1            # 0=betatunnel support disabled 1=betatunnel support enabled

[slot0]
active=1            # 0=inactive 1=active
sci=/dev/sci0            # lower
ncdserver=1            # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314   # newcamd deskey
port=15000            # newcamd port
mhz=357            # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1            # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=5               # how many ecms can be cached, 0 or less=cache disabled

#Nagra2/3 Example
[xxxxxx]            # nagra2 camid (4 bytes)
rsa=xxxxxx               # rsa "n" from this card (like newcs)
boxkey=xxxxx         # boxkey from this card
emm=0               # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=1            # use portlist or no
portlistpath=/var/keys/port.list   # path from port.list
#controlsid=3:0            # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid

Adaugi setari pentru readerul de oe celelalt slot si cu alt port pentru linia newcamd:
[slot1]
active=1            # 0=inactive 1=active
sci=/dev/sci1            # upper
ncdserver=1            # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314   # newcamd deskey
port=15001         # newcamd port
mhz=357            # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1            # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=5               # how many ecms can be cached, 0 or less=cache disabled

Si eventual setarile suplimentare,despre care nu pot sa spun prea multe,daca trebuie trecut CAMID iti apare in log care e si il treci in loc de ce e pus cu litera C ,in rest lasi asa:
#Conax Example
[CCCCCCCC]            # conax camid (4 bytes)
emm=0               # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0            # use portlist or no
portlistpath=            # path from port.list
rsa=               # rsa ecm used on paired cards
controlsid=0:0            # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid

Opreste cccam si seteaza sbox sa functioneze ca emu: server_only=1 + restart sbox
Ar trebui sa iti deschida numai cu sbox de pe ambele carduri.Daca e in regula mergi mai departe si faci user nou in users.sbox:
NC=user parola slot1 0 300 127.0.0.1
si in ccam.cfg linie :
N: 127.0.0.1 15001 user parola 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Setezi iar server_only=0 si le dai drumul la amandoua,ar trebui sa le vezi in cccam.